Desktop Estimate
Free
Send drawings, photos or a fitting count. A desktop estimate is returned within 48 hours where the information is usable.
What To SendPrices and timescales
No Mystery Day Rates. No Quote That Hides The Fitting Count.
These are working commercial prices for Warrington and nearby towns. The survey confirms access, fitting type, ceiling height, controls and whether the job can be done during normal hours.
Email For A Desktop EstimateSurvey and estimate
The First Price Is Clear Before A Van Rolls
On-Site Survey
£95 + VAT
Within 20 miles of Warrington. The survey cost is credited against accepted retrofit work over £1,500 + VAT.
Book By EmailInstalled fitting prices
Supplied, Fitted And Priced Per Fitting
| Work | Typical Installed Range | What Moves The Price |
|---|---|---|
| Standard LED panel swap | £68-£95 + VAT per fitting | Ceiling access, driver type, existing frame condition and occupied-area sequencing. |
| LED batten replacement | Survey priced rather than ranged because batten length, fixing surface and emergency variants change the fitting and labour mix. | Length, fixing surface, wiring condition, emergency variants and whether the area is dusty or live. |
| High-bay LED replacement | £185-£340 + VAT per fitting | Mounting height, access equipment, controls, beam angle and whether lift hire is needed. |
| Emergency lighting replacement or upgrade | £110-£210 + VAT per fitting | Fitting type, location, test access and any obvious coverage gaps found during survey. |
| Small commercial half-day labour visit | £240 + VAT plus materials | Suitable for small commercial remedial lighting work, not unrelated electrical fault call-outs. |
| Out-of-hours evening or weekend installation | 1.35x standard labour | Quoted after survey when downtime, public access or production makes daytime work a poor fit. |
Minimum installed order is £750 + VAT or 12 fittings, whichever is higher.
Job size examples
Three Ways A Quote Usually Lands
18-Panel Office
£1,224-£1,710 + VAT
Panel swaps during normal hours in 1 day if desks can be cleared in sequence and ceiling access is straightforward.
Send Photos42-Batten Workshop
£3,150-£5,460 + VAT
Usually 1-2 days for standard non-emergency battens, with final price confirmed after checking length, fixing surface and access.
See Fitting Types30-High-Bay Warehouse
£5,550-£10,200 + VAT
Usually 2-5 nights and often better out of hours if lift access clashes with forklift routes, racking aisles or loading times.
Ask About AccessLead times
The Calendar Is Part Of The Quote
Survey lead time
Typical survey lead time is 3 to 7 working days from first email.
Quote issue
Written quote within 2 working days after survey for sites under 150 fittings, or within 5 working days for larger premises.
Small sites
Most shops, offices and small workshops are completed in 1 day.
Larger sites
Warehouses and production areas usually take 2 to 5 days or nights depending on access.
Terms
Payment, VAT And Waste Are Not Footnotes
-
01
Deposit
Deposit is 30% on acceptance for materials.
-
02
Balance
Balance is due 7 days after completion for first-time customers.
-
03
VAT
Prices shown here are plus VAT unless stated otherwise.
-
04
Waste
Old fluorescent tubes, lamps and fittings are removed from site and sent through a licensed WEEE route.
Out of hours
When Paying The Uplift Saves The Bigger Cost
Out-of-hours evening or weekend installation is quoted at 1.35x standard labour after survey. It makes sense when daytime access would stop picking, block forklift lanes, disturb a retail floor or put scissor lift movement through a working production area.
First email
Send enough detail for Matt to price the route, not guess the ceiling.
Include the site address, approximate fitting count, ceiling height, access limits, photos of typical fittings and your preferred working hours.